@thesis{thesis,
		author={Fadhilah  Raffi and Hariyanto  Agung},
		title ={ANALISA PERBAIKAN JATUH TEGANGAN PADA JARINGAN DISTRIBUSI TEGANGAN MENENGAH PENYULANG ALUN 
PT. PLN (PERSERO) UP3 CIMAHI},
		year={2019},
		url={http://156.67.221.169/1340/},
		abstract={This final project aims to determine the value of the voltage drop that occurs along the JTM feeder alun, then fix the voltage drop and analyze the factors that influence the occurrence of voltage drop in JTM feeder alun. The analysis of the voltage drop that occurs in the alun feeder can be considered as a feasibility by PT PLN (Persero) UP3 Cimahi  for the development of JTM if there are additional burdens in the future. The method used in the voltage drop evaluation study is quantitative with proces  the documentary / literature method, interview and observation. Then with this method data processing is performed and the results of the calculation of voltage drop and the factors that influence the voltage drop are obtained. The send voltage on the Alun feeder is measured directly at 20,821 Volt. Based on the research results, the value of the received voltage at the end of the R6 feeder is 19877.62 Volt. (4.35% %) under real load conditions, 19831,71 Volt (4,75%) assuming the distribution of load substations is 80% after that the reconducting process is carried out which the produces a voltage drop of 20309,62 Volt (2,46%). Voltage drop occurs due to several factors, including channels too long, small cross-sectional area, large impedance values and the amount of load value.}
		}