@thesis{thesis,
		author={Habibi  Habibi},
		title ={Prototipe Pintu Geser Otomatis Menggunakan Sensor Gerak Pir},
		year={2017},
		url={http://eprints.polbeng.ac.id/8467/},
		abstract={The door is a medium used as a way to enter or exit the room. To facilitate a job 
required an effective and efficient tool. In general, the prototype of automatic sliding 
doors using PIR motion sensors is a device that detects the presence of humans or other 
living objects through the resulting body temperature. Maximum PIR sensor distance of 
10 M and at least 1 M. Microcontroller receives input from the PIR sensor, then the 
microcontroller gives output to IC L298N to move the motor. How it works when there 
is a human movement with a distance of 1 meter then the sensor issued a signal to the 
motor driver then opened the door, and will close again after delay time 3 seconds. 
Conditions apply only temporarily during system startup. After a while, this condition 
does not run anymore because the sensors used sensor type PIR movement V2 detector 
module.}
		}