@thesis{thesis,
		author={Suhendri  Suhendri},
		title ={Analisa Vibrasi Pada Variasi Posisi Pemasangan Sabuk Antara Kedua Kopling Pada Poros Pompa Sentrifugal},
		year={2018},
		url={http://eprints.polbeng.ac.id/8818/},
		abstract={The vibration that is studied is that the vibration that occurs on the centrifugal 
pump shaft is one of the results of the design of the mounting position of the belt 
as a connection between the two couplings between the centrifugal pump and the 
driving motor. Because when the vibration exceeds the ISO standard threshold 
can affect the age of use of centrifugal pumps and data in the form of value.
vibration documentation can be as a reference for maintenance or when 
troubleshooting will occur. The research was conducted to determine the high and 
low vibration generated during placement of the belt / flange installation. By 
varying the design of the belt mounting position and knowing the displacement, 
velocity, acceleration, at the vibration. By using a vibration meter measuring 
instrument with the position of a horizontal measurement point, the vibration 
device will point to the value of a digital number. This study found that 
measurement of deep belt displacement with an external design belt received a 
low vibration value (0.01mm) compared to the outer and outer belt design. For 
the measurement of the lowest vibration velocity values 0.12-0.13 m / sec. While 
the lowest acceleration vibration measurement is in the belt design position in the 
outer 3.1 m / sec2 with 18 sec.}
		}