@thesis{thesis,
		author={Hendra Beltsazar  David},
		title ={MANUFAKTUR MOULDING WING DENGAN METODE HAND LAY-UP DAN ANALISIS NILAI ERROR PADA WING MICRO PUNA WASP III BATMAV},
		year={2023},
		url={http://eprints.stta.ac.id/1112/},
		abstract={Manned aviation first appeared in the late 1700s and a century after that 
the aviation industry continued to grow until the creation of the unmanned 
aircraft (PUNA) in 1916, unmanned aircraft were considered very efficient for 
carrying out certain missions such as reconnaissance in the military because can 
carry payloads and can be armed according to the UAV configuration. The 
manufacturing process for the MICRO UAV WASP III BATMAV wing itself is 
carried out using the hand lay-up method, the hand lay-up method is a simple 
composite manufacturing method, this is because this method is easy to apply and 
the equipment used is simple, this method has the advantage that the 
manufacturing process is easy and does not require special equipment for the 
manufacturing process. The manufacturing process with this method is to pour 
resin by hand into fibers in the form of woven, knitted and others. Then apply 
pressure as well as flatten it using a roller or brush. Until the desired thickness is 
achieved. The average percentage error between the molding pattern data and 
the measurement data for the MICRO UAV WASP III BATMAV wing product at 
right wing chord was 0,023%, and the left wing chord was 0,031%. And then the 
average percentage error at right wing thick was 0,019%, and the left wing thick 
was 0,032% Accuracy value analysis at right wing chord was 99,976%, and the 
left wing chord was 99,968%. Accuracy value analysis at right wing thick was 
99,98%, and the left wing thick was 99,967%.}
		}