@thesis{thesis,
		author={SANDRA AFILA  RIFAI},
		title ={PENGARUH PENAMBAHAN SERBUK GENTENG SOKKA KEBUMEN
TERHADAP KEKUATAN TARIK PADA KOMPOSIT BERMATRIKS
RESIN POLYESTER DAN SERAT FIBERGLASS UNTUK BAHAN DASAR
BLADE},
		year={2018},
		url={http://eprints.stta.ac.id/2036/},
		abstract={Composite is a material consisting of two or more different materials and
combined or mixed macroscopically. In this study composites are intended for the
basic ingredients of making blades.
The composites used were reinforced from Sokka kebumen tile powder
with polyester and fiberglass fibers with the percentage variations in the volume
fraction of sokka tile powder 10%, 20%, 30%, and 40% with 200 mesh particle
sizes. This study aimed to identify the strength of the tensile test and SEM. The
method used during the composite manufacturing process was the Hand Lay-up
method or the open mold method.
The results of the tensile testing obtained the highest tensile strength from
the percentage fraction volume of 10% Sokka tile with a value of 43.31 MPa and
the lowest tensile strength obtained from the percentage fraction of Sokka tile
volume 30% with a value of 32.68 MPa.
The higher the percentage fraction of the Sokka tile powder generated the
lower the tensile strength of the composite itself. The result of SEM testing was
there was still a side of the fiber which was not doused evenly.}
		}