STUDI PERENCANAAN KAPASITAS PADA 2 GARDU TRAKSI UNTUK OPERASIONAL MASS RAPID TRANSIT (MRT) JAKARTA FASE 2 BUNDARAN HI – KOTA
Total View This Week0
Total View This Week0
Institusion
Institut Teknologi Perusahaan Listrik Negara
Author
Ilham, Muhamad Azizd
Hajar, Ibnu
Hajar, Ibnu
Subject
Teknik Elektro
Datestamp
2019-12-05 12:47:34
Abstract :
Transport infrastructure is growing rapidly to resolve traffic jams in Jakarta. Mass Rapid Transit (MRT) Jakarta which is a rail-based transportation become one of the solutions to resolve traffic jams. MRT Jakarta was operate with phase 1 route Lebak Bulus ? Bundaran HI and will be continue construction of MRT Jakarta phase 2 Bundaran HI ? Kota. So it is required capacity planning of traction substation. Traction substation (TSS) is special substation to supply power to the train through overhead catenary system (OCS). To determine the capacity of traction substation,supply distance between traction substation ,output power trains, and peak load are needed. Then, resistance of OCS also needed. from the calculation, the capacity of TSS are needed for Monas TSS is 3282,5758 kW and 2987,0911 kW for Kota TSS. Beside it, power losses from OCS is 22,8706 W with resistance of OCS 2,1541×10-5 ?/m from feeder wire H325sq.mm X 3, messenger wire AL-T-bar conductor 2456sq.mm,and contact/trolley wire GT110sq.mm.
Transport infrastructure is growing rapidly to resolve traffic jams in Jakarta. Mass Rapid Transit (MRT) Jakarta which is a rail-based transportation become one of the solutions to resolve traffic jams. MRT Jakarta was operate with phase 1 route Lebak Bulus ? Bundaran HI and will be continue construction of MRT Jakarta phase 2 Bundaran HI ? Kota. So it is required capacity planning of traction substation. Traction substation (TSS) is special substation to supply power to the train through overhead catenary system (OCS). To determine the capacity of traction substation,supply distance between traction substation ,output power trains, and peak load are needed. Then, resistance of OCS also needed. from the calculation, the capacity of TSS are needed for Monas TSS is 3282,5758 kW and 2987,0911 kW for Kota TSS. Beside it, power losses from OCS is 22,8706 W with resistance of OCS 2,1541×10-5 ?/m from feeder wire H325sq.mm X 3, messenger wire AL-T-bar conductor 2456sq.mm,and contact/trolley wire GT110sq.mm.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
