PERBAIKAN TEGANGAN PADA JARINGAN TEGANGAN MENENGAH PENYULANG PAKIS DI GARDU INDUK MENGGALA PROVINSI LAMPUNG
Total View This Week0
Total View This Week0
Institusion
Institut Teknologi Perusahaan Listrik Negara
Author
Hardiyanti, Gusti Ray
SP, Sampurno
SP, Sampurno
Subject
Teknik Elektro
Datestamp
2019-10-30 06:03:43
Abstract :
In the operation of the distribution system the voltage values at each point of the line must meet the quality standard of voltage where the voltage (V) operation is limited to 0.9 Vnom ? V operation ? 1.05 Vnom (or + 5% and -10% Vnom) in accordance with SPLN No. 01 Year 1995 ie + 5% and -10% of nominal voltage. For some feeder?s in the Lampung area of Tulang Bawang Regency, Menggala still encountered some Medium Voltage Networks which have far lower end voltage as an example of Pakis Feeder in Menggala main substation .Pakis feeder has a network length of 289 km and a tip end of 13.81 kV. Due to the large drop voltage so that need to be repaired. There are several ways of fixing voltage on JTM distribution, in doing the repair must be adjusted to the condition of the network physically and its operation. In relation to Pakis Feeder has a very long network length and load power is large enough in the discussion of the thesis used 2 methods of voltage corrective that is using the method of cutting the load channel and the remaining load of the cut channel will be borne with the addition of mini main substations. So that the voltage in the can according to the standard set
In the operation of the distribution system the voltage values at each point of the line must meet the quality standard of voltage where the voltage (V) operation is limited to 0.9 Vnom ? V operation ? 1.05 Vnom (or + 5% and -10% Vnom) in accordance with SPLN No. 01 Year 1995 ie + 5% and -10% of nominal voltage. For some feeder?s in the Lampung area of Tulang Bawang Regency, Menggala still encountered some Medium Voltage Networks which have far lower end voltage as an example of Pakis Feeder in Menggala main substation .Pakis feeder has a network length of 289 km and a tip end of 13.81 kV. Due to the large drop voltage so that need to be repaired. There are several ways of fixing voltage on JTM distribution, in doing the repair must be adjusted to the condition of the network physically and its operation. In relation to Pakis Feeder has a very long network length and load power is large enough in the discussion of the thesis used 2 methods of voltage corrective that is using the method of cutting the load channel and the remaining load of the cut channel will be borne with the addition of mini main substations. So that the voltage in the can according to the standard set
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
