Perbaikan Tegangan Pada Jaringan Tegangan Menengah
Penyulang Cisolok Di Gardu Induk Pelabuhan Ratu
Provinsi Jawa Barat
Total View This Week0
Total View This Week0
Institusion
Institut Teknologi Perusahaan Listrik Negara
Author
Nurhadianto, Nurhadianto
SP, Sampurno
SP, Sampurno
Subject
Teknik Elektro
Datestamp
2019-11-05 00:30:53
Abstract :
In the operation of the distribution system the voltage values at each point of the line must meet the quality standard of voltage where the voltage (V) operation is limited to 0.9 Vnom ? V operation ? 1.05 Vnom (or + 5% and -10% Vnom) in accordance with SPLN No. 01 Year 1995 ie + 5% and -10% of nominal voltage. For some feeder?s in Sukabumi District, West Java Province still encountered some Medium Voltage Networks which have lower end voltage as an example of Cisolok Feeder in Pelabuhan Ratu main substation. Cisolok feeder has a network length of 165.46 kms and a tip end of 17.85 kV. Due to the occurrence of voltage drop and tip voltage that does not meet the standard voltage so that need to be repaired. There are several ways of fixing voltage on JTM distribution, in doing the repair must be adjusted to the condition of the network physically and its operation. In relation to Cisolok Feeder has a very long network length and load is large enough then in the discussion of the thesis used method of voltage corrective in accordance with network conditions that is using the method of network reconfiguration and the remaining load on the reconfigured channel will be borne with Bayah Kota Feeder. So that the voltage can be in accordance with the standard set.
In the operation of the distribution system the voltage values at each point of the line must meet the quality standard of voltage where the voltage (V) operation is limited to 0.9 Vnom ? V operation ? 1.05 Vnom (or + 5% and -10% Vnom) in accordance with SPLN No. 01 Year 1995 ie + 5% and -10% of nominal voltage. For some feeder?s in Sukabumi District, West Java Province still encountered some Medium Voltage Networks which have lower end voltage as an example of Cisolok Feeder in Pelabuhan Ratu main substation. Cisolok feeder has a network length of 165.46 kms and a tip end of 17.85 kV. Due to the occurrence of voltage drop and tip voltage that does not meet the standard voltage so that need to be repaired. There are several ways of fixing voltage on JTM distribution, in doing the repair must be adjusted to the condition of the network physically and its operation. In relation to Cisolok Feeder has a very long network length and load is large enough then in the discussion of the thesis used method of voltage corrective in accordance with network conditions that is using the method of network reconfiguration and the remaining load on the reconfigured channel will be borne with Bayah Kota Feeder. So that the voltage can be in accordance with the standard set.
File :
(vii) Abstract.pdf
(viii) Daftar Isi.pdf
(xiv) Daftar Lampiran.pdf
COVER SKRIPSI.pdf
BAB V IAN.pdf
BAB I IAN.pdf
BAB II IAN.pdf
BAB III IAN.pdf
BAB IV IAN.pdf
Daftar Riwayat Hidup Dan Lampiran2.pdf
Lembar Bimbingan Skripsi.pdf
(xi) Daftar Tabel.pdf
(i) Lembar Pengesahan IAN.pdf
(ii) Lembar Pengesahan Tim Penguji.pdf
(iii) Lembar Pernyataan Keaslian.pdf
(xii) Daftar Gambar.pdf
(iv) Lembar Ucapan Terima Kasih.pdf
(v) Halaman Pernyataan Persetujuan Publikasi.pdf
(vi) Abstrak.pdf
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
