Rancang Bangun Mesin Potong Rumput Berbasis
Internet Of Thing (IoT) - (Sistem control dan motor
penggerak)
Total View This Week0
Total View This Week0
Institusion
Politeknik Negeri Bengkalis
Author
Sijabat, R.Harapokan Martua
Subject
451 Teknik Elektro
Datestamp
2024-09-03 01:42:16
Abstract :
Design and build lawn mowers based on the internet of things (IoT) is a system designed to drive driving components on lawn machines based on (IoT). In the design and construction of this IoT-based lawn mower, there are several components that play a very important role in the process from the beginning to the end of the work system, including components, namely: Grinder as the driver of the lawn mower blade, NodeMcu as the giver of commands from the blynk to the drivermodule to drive the motor, blynk useful for sending commands, such as turning the machine on or off, changing the direction of motion, or setting the cutting speed. When the control on the blynk is clicked or given instructions, a signal is sent to the control unit, which then directs the motor to move the knife according to the command. The 12V Voltage test obtained from the power supply will be flowed to the DC motor through the driver module and after measurements are made on the gearbox motor, the results of 12.32V voltage, nominal current 4.13A and starting current 22A are obtained.
Design and build lawn mowers based on the internet of things (IoT) is a system designed to drive driving components on lawn machines based on (IoT). In the design and construction of this IoT-based lawn mower, there are several components that play a very important role in the process from the beginning to the end of the work system, including components, namely: Grinder as the driver of the lawn mower blade, NodeMcu as the giver of commands from the blynk to the drivermodule to drive the motor, blynk useful for sending commands, such as turning the machine on or off, changing the direction of motion, or setting the cutting speed. When the control on the blynk is clicked or given instructions, a signal is sent to the control unit, which then directs the motor to move the knife according to the command. The 12V Voltage test obtained from the power supply will be flowed to the DC motor through the driver module and after measurements are made on the gearbox motor, the results of 12.32V voltage, nominal current 4.13A and starting current 22A are obtained.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
