Sistem Pemadam Kebakaran Diruangan Berbasis Mikrokontroller
Total View This Week0
Total View This Week0
Institusion
Politeknik Negeri Bengkalis
Author
Hidayat, Wawan
Subject
451 Teknik Elektro
Datestamp
2023-03-08 10:44:51
Abstract :
With the current technological advances, the needs of everyday equipment can not be separated from electricity, ranging from work equipment to home appliances. Under these conditions it is likely that there will be a fire due to the effect of discharging careless usage. In this process will be designed a fire suppression system equipped with Arduino Uno. The fire system prototype works with the sensor system. Has successfully created Airborne Temperature Control System Arduino Uno Based Room Using DHT11 Sensor. DHT11 sensor is used as a measure of the temperature and humidity of the room, In this experiment conducted on the sensitivity sensor DHT11 to room temperature with hot air given through wax for several minutes. This device uses an Arduino Uno board, a Liquid Crystal Display (LCD) module as a display of temperature and humidity and an air pump in anticipation of fire. This sensor system works if it detected hot temperatures and actively turned on its alarm and pump. From the results of perception that his system will work automatically if there is an increase temperature above 33 ?C.
With the current technological advances, the needs of everyday equipment can not be separated from electricity, ranging from work equipment to home appliances. Under these conditions it is likely that there will be a fire due to the effect of discharging careless usage. In this process will be designed a fire suppression system equipped with Arduino Uno. The fire system prototype works with the sensor system. Has successfully created Airborne Temperature Control System Arduino Uno Based Room Using DHT11 Sensor. DHT11 sensor is used as a measure of the temperature and humidity of the room, In this experiment conducted on the sensitivity sensor DHT11 to room temperature with hot air given through wax for several minutes. This device uses an Arduino Uno board, a Liquid Crystal Display (LCD) module as a display of temperature and humidity and an air pump in anticipation of fire. This sensor system works if it detected hot temperatures and actively turned on its alarm and pump. From the results of perception that his system will work automatically if there is an increase temperature above 33 ?C.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
