Analisa Sifat Mekanik Uji Tarik Dan Uji Kekerasan Pada Sambungan Pengelasan Aluminium 6061 Dengan Metode Friction Welding
Total View This Week0
Total View This Week0
Institusion
Politeknik Negeri Bengkalis
Author
Marto, Zairan
Subject
431 Teknik Mesin (dan Ilmu Permesinan Lain)
Datestamp
2023-07-11 09:34:31
Abstract :
Friction Welding (Friction Welding) technology is one of the new welding process where the production cost is low and the connection produced is good quality. By combining heat and pressure two pieces of metal will be connected. In this study will analyze the mechanical properties of the welding results with 826 rpm lathe, 1358 rpm, and 2135 rpm. The results showed there are differences in hardness of three variations of chuck rotation. At 826 rpm there was a significant decrease in the welding area compared to other rpm forward of 60 HRc, but at 1,358 rpm and 2135 rpm with the value of 71 HRc and 74 HRc on the weld area. The larger the given cycle will cause the process of fusing the two materials faster and also Make the value of violence increases. The stress and tension values on the tensile test of 112.45 (N / mm2 ) at a speed of 2135 rpm. From this result it can be seen that the highest voltage is at 2135 rpm there is a speed of 826 rpm.
Friction Welding (Friction Welding) technology is one of the new welding process where the production cost is low and the connection produced is good quality. By combining heat and pressure two pieces of metal will be connected. In this study will analyze the mechanical properties of the welding results with 826 rpm lathe, 1358 rpm, and 2135 rpm. The results showed there are differences in hardness of three variations of chuck rotation. At 826 rpm there was a significant decrease in the welding area compared to other rpm forward of 60 HRc, but at 1,358 rpm and 2135 rpm with the value of 71 HRc and 74 HRc on the weld area. The larger the given cycle will cause the process of fusing the two materials faster and also Make the value of violence increases. The stress and tension values on the tensile test of 112.45 (N / mm2 ) at a speed of 2135 rpm. From this result it can be seen that the highest voltage is at 2135 rpm there is a speed of 826 rpm.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
