Analisa Rancang Bangun Modifikasi Alat Bantu Plasma Cutting Dalam Pemotongan Pipa
Total View This Week0

Institusion

Politeknik Negeri Bengkalis

Author

Sariantoni, Sariantoni

Subject

 

Datestamp

2023-07-18 10:37:15 

Abstract :
Problem of plasma cutting that still handy portable and doesn?t include transmission devices. This resulted of engine performance plasma cutting not maximal and movement of hand torch relatively not constant since machine was operated manually (hand). In this final project, a modified design of plasma cutting aids is made to optimize the performance of the plasma cutting machine during the pipe cutting process. From the calculation, the rotation speed generated in this plasma cutting tool is 8.875 rpm using three times the transmission system namely gearbox and pully. The motor selected in this plasma cutting tool is an electric motor with a rotation speed of 1420 rpm, with a rotation speed of 1420 rpm and then transmitted to a 10: 1 ratio gearbox found in the gearbox resulting in a rotating speed of 142 rpm at the first transmission. Then continued on the second and third transmissions on pully with a ratio of 4: 1 in each transmission so that the final rotation speed on the chuck of the plasma cutting aids is 8,875 rpm. 

File :
TA - 2204141048 - ABSTRACT.pdf
TA - 2204141048 - BAB I.pdf
TA - 2204141048 - DAFTAR PUSTAKA.pdf
TA - 2204141048 - FULL TEXT.pdf