PENGARUH VARIASI HEAT INPUT PENGELASAN SMAW TERHADAP
KEKUATAN TARIK DAN KEKERASAN PADA PLAT BORDES
Total View This Week0
Total View This Week0
Institusion
INSTITUT TEKNOLOGI DIRGANTARA ADISUTJIPTO
Author
RONI SAGITA, CANDRA
Subject
T Technology (General)
Datestamp
2024-07-02 04:00:34
Abstract :
Bordes plate or flower plate is a plate that has a wavy shaped parallelogram on one surface to reduce the risk of slip accident. Because of its bumpiness, roughness, weather resistances and low wear surface, this plate is often used in building construction. Usually these bordes plate are widely used on steel or iron floor and stair components, for decks, bus floors, car mats. This research was conducted to identify the effects of heat input variations on SMAW welding to tensile strength and hardness of bordes plate. The research used heat input 1 (135.46 J/mm), heat input 2 (147.78 J/mm) and heat input 3 (160.09 J/mm). The material used is bordes plate and the method used in the welding process is SMAW welding. The tensile test results showed the lowest tensile strength at heat input 1 is 320.69 MPa. The lowest VHN at heat input 1 is 175.31 kg/mm 2 and the highest VHN at heat input 3 is 191.22 kg/mm 2 .
Bordes plate or flower plate is a plate that has a wavy shaped parallelogram on one surface to reduce the risk of slip accident. Because of its bumpiness, roughness, weather resistances and low wear surface, this plate is often used in building construction. Usually these bordes plate are widely used on steel or iron floor and stair components, for decks, bus floors, car mats. This research was conducted to identify the effects of heat input variations on SMAW welding to tensile strength and hardness of bordes plate. The research used heat input 1 (135.46 J/mm), heat input 2 (147.78 J/mm) and heat input 3 (160.09 J/mm). The material used is bordes plate and the method used in the welding process is SMAW welding. The tensile test results showed the lowest tensile strength at heat input 1 is 320.69 MPa. The lowest VHN at heat input 1 is 175.31 kg/mm 2 and the highest VHN at heat input 3 is 191.22 kg/mm 2 .
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
