MANUFAKTUR ENGINE TEST BED DLE-55CC SINGLE
CYLINDER PETROL
Total View This Week0
Total View This Week0
Institusion
INSTITUT TEKNOLOGI DIRGANTARA ADISUTJIPTO
Author
Iin Infitah Hilmiah, Siti
Subject
T Technology (General)
Datestamp
2024-07-19 08:27:42
Abstract :
Engine test bed is a tool used for testing in the development of new aircraft engines when installed into aircraft to determine the capabilities of each engine. This engine test bed manufacturing aims to meet the needs of the learning process in supporting practical activities. By determining the geometry, modeling, material selection, manufacture, and testing of the engine test bed, it will know the good engine performance before use. The manufacturing method used to manufacture the engine test bed uses cutting, drilling, welding and threaded fasteners. And using practical and analytical methods to get test data validation. The manufacturing process for this engine test bed starts with the manufacture of the main structure consisting of the manufacture of a test table, load cell holder, sliding rail, manufacture of engine mounting, manufacture of protection structure and ends with assembly. Furthermore, in this study, the preparation of the test was carried out by collecting data, the results of the engine test obtained were then validated by comparing the value of the static thrust calculator and the test data of the test equipment that had been carried out, then looking for the value of the fuel consumption used. The measured thrust results were compared with the static thrust calculator values obtained by an average difference. From the results of the comparison of errors on the test equipment, the 22×8 propeller (4.5cm chord) obtained an average error of 4.178%. While the propeller 22×8 (chord 5cm) the error generated is 3.719% and from the value of fuel consumption obtained it produces 588,600-20,708 (N/kW.hr) this shows a good level of decline, so the engine used is more efficient in use. From the test results, it can be said that the engine test bed has accuracy and can produce good engine performance
Engine test bed is a tool used for testing in the development of new aircraft engines when installed into aircraft to determine the capabilities of each engine. This engine test bed manufacturing aims to meet the needs of the learning process in supporting practical activities. By determining the geometry, modeling, material selection, manufacture, and testing of the engine test bed, it will know the good engine performance before use. The manufacturing method used to manufacture the engine test bed uses cutting, drilling, welding and threaded fasteners. And using practical and analytical methods to get test data validation. The manufacturing process for this engine test bed starts with the manufacture of the main structure consisting of the manufacture of a test table, load cell holder, sliding rail, manufacture of engine mounting, manufacture of protection structure and ends with assembly. Furthermore, in this study, the preparation of the test was carried out by collecting data, the results of the engine test obtained were then validated by comparing the value of the static thrust calculator and the test data of the test equipment that had been carried out, then looking for the value of the fuel consumption used. The measured thrust results were compared with the static thrust calculator values obtained by an average difference. From the results of the comparison of errors on the test equipment, the 22×8 propeller (4.5cm chord) obtained an average error of 4.178%. While the propeller 22×8 (chord 5cm) the error generated is 3.719% and from the value of fuel consumption obtained it produces 588,600-20,708 (N/kW.hr) this shows a good level of decline, so the engine used is more efficient in use. From the test results, it can be said that the engine test bed has accuracy and can produce good engine performance
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
