PERANCANGAN HUB DAN NACELLE TURBIN ANGIN BERDASARKAN
KEMUDAHAN DALAM PROSES PEMBUATAN DAN PEMASANGAN
Total View This Week0
Total View This Week0
Institusion
INSTITUT TEKNOLOGI DIRGANTARA ADISUTJIPTO
Author
Faizin, Afdhalul
Subject
T Technology (General)
Datestamp
2024-07-23 06:44:39
Abstract :
Hub is a structure used to connect blades and shafts. The hub structure must be able to withstand wind loads as well as loads during operation. While the hub selection process is based on the ease of manufacture and installation of blades with hubs. The purpose of this Final Assignment is to create 3 designs of hub and nacelle based on ease in the process of manufacture and installation and choose the right design based on the criteria of ease in the process of manufacture and installation. In this study, hubs and nacelle were modeled and analyzed using CATIA V5R20 software. Hub voltage analysis aims to determine the value of stress and weight generated from the three models of hubs that have been made to compare. The types of hubs proposed are lapjoint models, closed and open models. In addition to analyzed, hub selection process is done by comparing the three hub models based on the ease of manufacture and installation process. The analysis results show that the hub type in the lapjoint system matches the desired design criteria. While the maximum voltage value of the analysis results show 1.08e + 005 N / m2 and MS value of 23147.14815 so that the structure is safe.
Hub is a structure used to connect blades and shafts. The hub structure must be able to withstand wind loads as well as loads during operation. While the hub selection process is based on the ease of manufacture and installation of blades with hubs. The purpose of this Final Assignment is to create 3 designs of hub and nacelle based on ease in the process of manufacture and installation and choose the right design based on the criteria of ease in the process of manufacture and installation. In this study, hubs and nacelle were modeled and analyzed using CATIA V5R20 software. Hub voltage analysis aims to determine the value of stress and weight generated from the three models of hubs that have been made to compare. The types of hubs proposed are lapjoint models, closed and open models. In addition to analyzed, hub selection process is done by comparing the three hub models based on the ease of manufacture and installation process. The analysis results show that the hub type in the lapjoint system matches the desired design criteria. While the maximum voltage value of the analysis results show 1.08e + 005 N / m2 and MS value of 23147.14815 so that the structure is safe.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
