Perancangan rangkaian charger telepon selular dengan sumber tegangan Dirrect Curent (DC) eksternal
Total View This Week0
Total View This Week0
Institusion
Institut Teknologi Telkom Purwokerto
Author
Tofik, Budiarto
Subject
T Technology (General)
Datestamp
2021-04-23 04:35:46
Abstract :
Sources ration used in cell phones is the battery, when the battery voltage is over the phone can not be used as it should. Presumably these problems could be solved if there is a mobile device without using the power supply from PLN power ration is less practical, but with the use of a DC voltage that is around us, a cell phone charger circuit design is divided into several blocks, namely sequence block astabler multivibrator circuit, circuit blocks voltage doubler and voltage regulator circuit blocks. With the design of the device can be used for the charging process. Another advantage with a charger device is able to dole more than one mobile phone simultaneously and without relying ration of PLN, so it is portable results obtained from the design of this device is that it can be used for charging mobile phones and other devices such as the iPod 30 pin, 20 pin Samsung combie , LG 18 pin, 20 pin Samsung, Micro USB, Nokia 2.0, Nokia 3.5, PSP, mini USB and Sony ericson. The voltage generated in the whole series is equal to 6.23 V. With a voltage of 6.23 V can already be used for charging mobile phones, as well as on a normal mobile phone charger that produces an output voltage of approximately 5 V. For the development is expected to be charging more apart from the type of mobile phone. Keywords: Series of chargers, mobile phone, power ration DC
Sources ration used in cell phones is the battery, when the battery voltage is over the phone can not be used as it should. Presumably these problems could be solved if there is a mobile device without using the power supply from PLN power ration is less practical, but with the use of a DC voltage that is around us, a cell phone charger circuit design is divided into several blocks, namely sequence block astabler multivibrator circuit, circuit blocks voltage doubler and voltage regulator circuit blocks. With the design of the device can be used for the charging process. Another advantage with a charger device is able to dole more than one mobile phone simultaneously and without relying ration of PLN, so it is portable results obtained from the design of this device is that it can be used for charging mobile phones and other devices such as the iPod 30 pin, 20 pin Samsung combie , LG 18 pin, 20 pin Samsung, Micro USB, Nokia 2.0, Nokia 3.5, PSP, mini USB and Sony ericson. The voltage generated in the whole series is equal to 6.23 V. With a voltage of 6.23 V can already be used for charging mobile phones, as well as on a normal mobile phone charger that produces an output voltage of approximately 5 V. For the development is expected to be charging more apart from the type of mobile phone. Keywords: Series of chargers, mobile phone, power ration DC
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
