Abstract :
The design of Fiber To The BTS Network, especially the Sokaraja area is
not evenly distributed, to meet the customer's need for bandwidth, the design of
Fiber To The BTS is for the provider needs to increase bandwidth with GPON
technology that has been widely used, new technology has been developed to
improve the previous technology, namely XGPON. So it was designed Fiber To
The BTS using GPON technology by comparing XGPON technology. The design
of network design is done by using software optisystem and simulations for power,
link budget parameters, Bit Error Rate and Q Factor. In both technologies,
parameter simulation with 6 dBm power for the downstream side with the same
power link budget simulation results of -17.260 dB and the same calculation
results of -14.152 dB, for BER parameters obtained 1x10
-128
for GPON and 2x10
-
29
technology for XGPON technology, for Q Factor parameters obtained 24.1066
for GPON technology and 11.1901 for XGPON technology. On the Upstream
side, it uses 3 dB of power by obtaining a power link budget of -20,316 dBm for
simulation and 17,152 dB for calculations, for the Bit Error Rate parameter
obtaining a value of 6x10
-79
for GPON and 4x10
-38
technology for XGPON
technology, in parameters Q Factor obtained a value of 18.7746 for GPON
technology and 12.8445 for XGPON technology. In both technologies to obtain
results that can be said to be good because the value obtained has met the ITU-T
standards.
Keyword : Fiber To The BTS, GPON, XGPON.