Abstract :
Microwave radio communication used as transmission between Base Tranciever
Station (BTS) to Base System Control (BSC). Meanwhile, in Indonesia has many
mountain or hill which can cause communication in transmitter is not fully received by
receiver. Communication disorders due to there are object between the hop link
transmission is called multipath fading. The situation can be solved with passive repeater
antenna and back to back repeaters plane reflector.
In this skripsi will be made microwave network design use repeater back to back
antenna and repeater plane reflector on the same site. Microwave network planning in
area Bogor on site Gedong Panjang with coordinates 06 55 52.79 S 106 55 22.67 E and
Teluk Pinang at coordinates 06 40 41.31 S 106 50 55.60 E. The design of microwave
network using software Pathloss 5.0.
The result of the RSL using repeater antenna back to back iis -82.88 dBm and the
availability is 99.86687%. When using a plane reflector RSL value is -77.07 dBm and the
availability value is 99.94187%.. Both the value of the result availability already in the
ideal conditions because the value is above 99%, but from the results comparison of the
performance, the availability value while using reflector better than while using repeater
back to back. So by using reflector for microwave transmission network system can
increase good quality service.
Keyword : Microwave, Pathloss 5.0, Repeater Back To Back Antenna, Repeater Plane
Reflector,