MANUFAKTUR MOULDING WING DENGAN METODE HAND LAY-UP DAN ANALISIS NILAI ERROR PADA WING MICRO PUNA WASP III BATMAV
Total View This Week0
Total View This Week0
Institusion
INSTITUT TEKNOLOGI DIRGANTARA ADISUTJIPTO
Author
Hendra Beltsazar, David
Subject
T Technology (General)
Datestamp
2024-02-15 08:26:38
Abstract :
Manned aviation first appeared in the late 1700s and a century after that the aviation industry continued to grow until the creation of the unmanned aircraft (PUNA) in 1916, unmanned aircraft were considered very efficient for carrying out certain missions such as reconnaissance in the military because can carry payloads and can be armed according to the UAV configuration. The manufacturing process for the MICRO UAV WASP III BATMAV wing itself is carried out using the hand lay-up method, the hand lay-up method is a simple composite manufacturing method, this is because this method is easy to apply and the equipment used is simple, this method has the advantage that the manufacturing process is easy and does not require special equipment for the manufacturing process. The manufacturing process with this method is to pour resin by hand into fibers in the form of woven, knitted and others. Then apply pressure as well as flatten it using a roller or brush. Until the desired thickness is achieved. The average percentage error between the molding pattern data and the measurement data for the MICRO UAV WASP III BATMAV wing product at right wing chord was 0,023%, and the left wing chord was 0,031%. And then the average percentage error at right wing thick was 0,019%, and the left wing thick was 0,032% Accuracy value analysis at right wing chord was 99,976%, and the left wing chord was 99,968%. Accuracy value analysis at right wing thick was 99,98%, and the left wing thick was 99,967%.
Manned aviation first appeared in the late 1700s and a century after that the aviation industry continued to grow until the creation of the unmanned aircraft (PUNA) in 1916, unmanned aircraft were considered very efficient for carrying out certain missions such as reconnaissance in the military because can carry payloads and can be armed according to the UAV configuration. The manufacturing process for the MICRO UAV WASP III BATMAV wing itself is carried out using the hand lay-up method, the hand lay-up method is a simple composite manufacturing method, this is because this method is easy to apply and the equipment used is simple, this method has the advantage that the manufacturing process is easy and does not require special equipment for the manufacturing process. The manufacturing process with this method is to pour resin by hand into fibers in the form of woven, knitted and others. Then apply pressure as well as flatten it using a roller or brush. Until the desired thickness is achieved. The average percentage error between the molding pattern data and the measurement data for the MICRO UAV WASP III BATMAV wing product at right wing chord was 0,023%, and the left wing chord was 0,031%. And then the average percentage error at right wing thick was 0,019%, and the left wing thick was 0,032% Accuracy value analysis at right wing chord was 99,976%, and the left wing chord was 99,968%. Accuracy value analysis at right wing thick was 99,98%, and the left wing thick was 99,967%.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
